Read the how-to after the jump.
|The pattern is from here, although I had to subtract a couple of inches from the top to make the collar fit, so be sure to measure around your neck to get the best fit. Any sequin fabric should work, I used a sequin mini skirt (the lining of the skirt was used for the back of the collar).|
|1. Lay out the pattern on fabric and cut out 2 pieces from the sequin fabric for the front and 2 pieces from the lining fabric for the back.|
|2. Put the sequin pieces together (right sides facing) and sew along top edge (see pic) to join the pieces together. Repeat with the 2 lining pieces.|
|3. Pin the sequin piece and the lining piece together (right sides facing) and sew along the outer edge leaving a 2 inch opening to turn it (see pic).|
|4. Turn the collar right side out through the 2 inch opening you left on the previous step.|
|5. Hand sew the opening closed with the needle and thread.|
|6. Sew on the hook and eye.|